Motor Mounts

[scrag]

We have a 360 in a 68 Dart that was originally a slant 6 car. We used a 71 Dart swinger K frame and some engine mounts we bought from O'Reillys but had to use some washers to get them to work. Engine also seems to sit low and centerlink clearance is marginal. My question is this - is there a better Engine Mount we can use?

 

[Bad Sport]

Check these against what you have and see if there is a difference. Third set down on the page.

http://www.engine-swaps.com/Pages/ProductsYear/67.72aBody.html#head1

 

[cudamark]

'68-72 340/360 motor mount brackets with the proper rubber mounts should do the trick if you don't want to use the aftermarket conversion stuff.