mounting square bore on spread bore manifold

[mokid]

Been running a thermoquad on my 340. Want to install an AFB using an adapter plate. The bolt holes (on adapter) are really close. Anybody have any pics or links showing a "pretty" way of doing it? .......... tks ...........mokid

 

[Bad Sport]

You could use this, it covers the bow shaped sides on the secondaries.

http://www.summitracing.com/parts/edl-2732/overview/

 

[jerry6]

Why , the tq is a good carb

 

[discharger1332]

the link bad sport posted is what i use

 

[diymirage]

the link bad sport posted is what i use

+1

I ran that under my 600 CFM eddy, and I'm pretty sure Mike is planning on reusing it under the 750 he's putting on

 

[RustyRatRod]

You could use this, it covers the bow shaped sides on the secondaries.

http://www.summitracing.com/parts/edl-2732/overview/

This ^^^^^^ is the best way. Works very well.

 

[Duster_71]

You could use this, it covers the bow shaped sides on the secondaries.

http://www.summitracing.com/parts/edl-2732/overview/

Get this!!!! I fought a vacuum leak for a year without it. For $8-10 you'll save your self a headache.