64physhy
Well-Known Member
I've been working on building this for about 6 months now. Here's what's in it:
360 block, +.060
Eagle Forged Crank
Hughes Main Stud Girdle
Eagle H-Beam Rods
Hughes 3742 cam (237/242 dur)
KB 745 Forged Step-dish pistons with .030 milled off the step.
Hughes Ported Iron Ram Heads, 2.055 intake valves, beehive springs.
PRW Stainless 1.65:1 roller rockers with a Jomar rocker stud girdle
Port Matched Edelbrock Airgap RPM
Proform 750 racing carb
MSD E-curve distributor (on the way)
I'm thinking I should get close to 500 HP out of it. A bigger cam would get me over that.
360 block, +.060
Eagle Forged Crank
Hughes Main Stud Girdle
Eagle H-Beam Rods
Hughes 3742 cam (237/242 dur)
KB 745 Forged Step-dish pistons with .030 milled off the step.
Hughes Ported Iron Ram Heads, 2.055 intake valves, beehive springs.
PRW Stainless 1.65:1 roller rockers with a Jomar rocker stud girdle
Port Matched Edelbrock Airgap RPM
Proform 750 racing carb
MSD E-curve distributor (on the way)
I'm thinking I should get close to 500 HP out of it. A bigger cam would get me over that.