azmopar
rust free parts guy
dash vents and armrests door panels too if they arent cut up seat belts too esp the dr side :thumrigh:
My '67 Valiant 100 Big Block 4 Speed Restoration
- Thread starter 67valiant 100
- Start date
-
dash vents and armrests door panels too if they arent cut up seat belts too esp the dr side :thumrigh:
pauly v.100
Well-Known Member
my dash vents and arm rests were toast. the door panels i'll re-use after dying. i can help with the seatbelts though, i'll try to get some pics in the next day or so and post them on this thread. i'll pm you when i get them up.
i also have a usable red headliner (1 small tear, fixable) and a red steering wheel in realy nice shape.
-pauly
i also have a usable red headliner (1 small tear, fixable) and a red steering wheel in realy nice shape.
-pauly
azmopar
rust free parts guy
good on the wheel and headliner do need bows tho and the dr seatbelt in red would be great
Taking a snooooze:sleepy1:
azmopar
rust free parts guy
felt like that MANY times lol:thumblef:
73dart360
Well-Known Member
you are working your butt off on your Valiant , its looking great , keep it up
Midnight Valiant
Active Member
Great to see another Valiant lover. I will be starting my '68 project soon. I cant wait! Keep your progress posted!
Finnaly did something this past week:cheers:
Took the three doors apart to get them ready for striping & primer. The green one is the one we got a the past Carlie Mopar show along with the trunk lid from the same car. It's from a '69 Valiant. They change around the lock knob position: on the '67 its all the way to the rear of the door, on the '69 it's closer to the middle of the door:angry5: We plan on using the guts from the junk door and install them on the good door.
Took the three doors apart to get them ready for striping & primer. The green one is the one we got a the past Carlie Mopar show along with the trunk lid from the same car. It's from a '69 Valiant. They change around the lock knob position: on the '67 its all the way to the rear of the door, on the '69 it's closer to the middle of the door:angry5: We plan on using the guts from the junk door and install them on the good door.
Also finished taking the surface rust off from the fenders from letting them sit bare for 2-3 months:banghead: and getting them in primer. We did the backsides (strip rust & prime) one day and another day we did the outsides (strip rust & prime).
Also pick this up. A person was throwing it out so I saved it to use as a vent fan for fumes :fart:
I rigged up a base and put a 1/4hp electric motor (the black one in the pic) to it via belt and man does that move the airfftheai:
I rigged up a base and put a 1/4hp electric motor (the black one in the pic) to it via belt and man does that move the airfftheai:
Also is this an original 340 K-member? It has the washer welded to the front. Is there any way of dating these?
Thats it for now :glasses2:
Just received my factory '67 Valiant 100 radio block-off plate from Small Block. Now all I need is a heater delete plate........
Just wanted to see what it looked liked installed:heart:
When the time comes I'll repaint it.
When the time comes I'll repaint it.
Tnplumber
Well-Known Member
man awesome job, really like that red on red color scheme.
Thanks Tnplumber. I originally thought about going with a black interior but I realized how rare the red interior is so I'm going to stick with that.
3forty
"Raw Power"
What,no tunes!!!!!
Some progress!!!!!!!!!! :cheers::cheers::cheers::cheers::cheers:
I picked up a '73 & later small block k-frame with spool mounts for $20:cheers:
I plan on making a Direct -><- Connections style big block k-frame by cutting the mounts on the k-frame and moving them. The engine mounts that came with it are also the correct ones to use with this modification.:-D
I picked up a '73 & later small block k-frame with spool mounts for $20:cheers:
I plan on making a Direct -><- Connections style big block k-frame by cutting the mounts on the k-frame and moving them. The engine mounts that came with it are also the correct ones to use with this modification.:-D
Gotta make it as bare bones as possible:-D Also wanna do a factory style heater delete thing too:toothy8:
3forty
"Raw Power"
Why is that?
Also picked up a very clean, correct style oil pan for a big block in an A-body for $20 too:cheers:
Its to get that really el-cheapy vibe :happy10: (also the added bonus of less weight :-D)
And for some actual progress on the Valiant I striped the 2 doors that we are using.
Hopefully within the next month I will be getting my new AMD floor pan :cheers:
Thats it for now
Thats it for now
-
