WONTGETDUSTED
CRACKED-OUT MOPAR TECH JUNKY
- Joined
- Oct 6, 2006
- Messages
- 94
- Reaction score
- 0
Ok, Sunday I Got Out The Habor Freight Siphon Feed Sandblaster And The 3 Types Of Media I Planed To Try And Used The 70 New Yorker In The Back Yard As A Test Subject....here Is What I Found Out
Yes You Can Use Soda In These Blasters
Soda Cuts In Pretty Quick And Leaves The Metal Smooth To The Touch And Wont Beat The **** Out Of You,however Where A Vent Mask....saw No Signs Of Metal Wrapage...the Easest Of The Three To Work With ,wont Do **** To Rust Other That Just Barely Not The Lose Stuff Off
Play Sand- Cuts In A Little Quicker Than Soda ,leaves The Metal With A Slightly Rough Texture,and Will Beat The **** Out Of You , Wear Something That Covers Your Entire Body.....saw No Signs Of Metal Warpage,takes Off Rust
Walnut Shell- Junk. Would Probly Work Well With A Professional Blaster And A Indust. Compressor At 175 Psi Or More. Took A Good Ill Longer To Cut In(night And Day Difference) However Left Metal Smooth (once It Finally Got Going Taking Paint Off). Took The Largest Amount By Far To Do The Least Amount Work. Has No Effect On Rust
I Have Now Decided To Play Around Making My On Mix Of These Three And Will Let Ya'll Know What Works Best...right Now I'm Kinda Undecided On Which I'm Going To Do The Duster With. The Soda Makes Metal Look Good And Smooth ,but I Think Paint Would Stick Better To Surface Sand Leaves.....
Yes You Can Use Soda In These Blasters
Soda Cuts In Pretty Quick And Leaves The Metal Smooth To The Touch And Wont Beat The **** Out Of You,however Where A Vent Mask....saw No Signs Of Metal Wrapage...the Easest Of The Three To Work With ,wont Do **** To Rust Other That Just Barely Not The Lose Stuff Off
Play Sand- Cuts In A Little Quicker Than Soda ,leaves The Metal With A Slightly Rough Texture,and Will Beat The **** Out Of You , Wear Something That Covers Your Entire Body.....saw No Signs Of Metal Warpage,takes Off Rust
Walnut Shell- Junk. Would Probly Work Well With A Professional Blaster And A Indust. Compressor At 175 Psi Or More. Took A Good Ill Longer To Cut In(night And Day Difference) However Left Metal Smooth (once It Finally Got Going Taking Paint Off). Took The Largest Amount By Far To Do The Least Amount Work. Has No Effect On Rust
I Have Now Decided To Play Around Making My On Mix Of These Three And Will Let Ya'll Know What Works Best...right Now I'm Kinda Undecided On Which I'm Going To Do The Duster With. The Soda Makes Metal Look Good And Smooth ,but I Think Paint Would Stick Better To Surface Sand Leaves.....