Nasty Cams...whatcha got?

-
Of course all cams sound good through open headers but here is mine with a full exhaust through Ultra Flo mufflers...

Cam in a Lunanti solid roller :
- 314 / 322 advertised duration (278 / 286 @ 0.05”)
- 106 degree lobe separation
- .636/.636 lift (with 1.5 ratio rockers)

[ame="http://i28.photobucket.com/albums/c238/stumpernc/Savoy/Video%20clips/SDC11137.mp4"][/ame]
[ame="http://s28.photobucket.com/user/stumpernc/media/Savoy/Video%20clips/SDC11137.mp4.html"]New Wheels Video by stumpernc | Photobucket[/ame]

Oh, I did have one of it running on the dyno .....

[ame="http://s28.photobucket.com/user/stumpernc/media/Savoy/Video%20clips/SDC10052.mp4.html"]700Hp Video by stumpernc | Photobucket[/ame][ame="http://i28.photobucket.com/albums/c238/stumpernc/Savoy/Video%20clips/SDC10052.mp4"][/ame]
 
Here's a couple of mine.
It's a 236/242 @ .050 with a .588/.588 lift in a 390 Magnum running 11:1 compression
All through the mufflers too.

[ame="http://www.youtube.com/watch?v=J7SqqSv1oeM"]First Dart Drive of the year - YouTube[/ame]

[ame="http://www.youtube.com/watch?v=NUDjZAiDILA"]1970 Dart HD Walk around after polishing - YouTube[/ame]
 
I wish I had some better videos but here are a few I had taken before I pulled the motor. Bullet cam with .555 lift and somewhere around [email protected]. Selling the cam, lifters, and springs and going to a roller with .650+ lift.

[ame="https://www.youtube.com/watch?v=BjhxraQcv60&feature=youtube_gdata_player"]Dodge Dart 416 Stroker Open Headers - YouTube[/ame]

[ame="https://www.youtube.com/watch?v=N4LWwP4tkfo&feature=youtube_gdata_player"]Dart rolling out - YouTube[/ame]

[ame="https://www.youtube.com/watch?v=LlPCKG0cDjs&feature=youtube_gdata_player"]416 test run - YouTube[/ame]
 
OldmanRick said:
I'm not talking Voodoo's, Magnums, XE's and such......

Let hear your serious race type sounds......I love it and with no car, it's all I got right now.....:D. Let's hear/see um'

I'll start with this You Tube Duster......
Plymouth Duster mopar - YouTube
Click to expand...

I think that is Nevada. The back window says TOP GUNS. There is a Speedway called that in Northern Nevada, Fallon to be exact!:burnout:
 
Check out the idle on this waiting for the light!
[ame="http://www.youtube.com/watch?v=hZxkD--u9DY"]Greg's 9 second 74 Duster - YouTube[/ame]
 
My Lunati:

Advertised Duration (Int/Exh): 285/293
Duration @ .050 (Int/Exh): 255/263
Gross Valve Lift (Int/Exh): .600/.600
LSA/ICL: 110/106
Valve Lash (Int/Exh): 016/016
RPM Range: 3200-7200
My actual lift is .643 with 1.6 rockers

[ame]http://youtu.be/nwJUZ2xlcJM[/ame]
 
[ame=http://i370.photobucket.com/albums/oo147/johnnydart_photo/Drivingthedodge_zps405f25dd.mp4]
th_Drivingthedodge_zps405f25dd.jpg
[/ame]

here is mine. stock stroke 383. with .525 lift cam and .254 @ .050
 
This is the only vid I have for now. 64 old school mean. Side exhausts.

[ame="http://m.youtube.com/watch?v=u2g30I5PfgE"]1964 Plymouth Valiant Engine Running - YouTube[/ame]
 
Heres my 66 b body with a 340 in it, this is the second time it has run. audio kinda sucks because its recorded through a cell phone.

[ame]http://youtu.be/E4oxVJaY_rk[/ame]
 
I started this thread to get a engine/cam fix since i'm without a car for a while......You guy's are great for posting here. I'm absolutely loving it. Great stuff...:thumleft:
 
You must log in or register to reply here.
-

Back
Top