NEED 74 Duster Water Pump Pulley for 318!!!

-
Status
Not open for further replies.
Klayton9

Klayton9

Active Member
Joined
Apr 11, 2012
Messages
36
Reaction score
1
Location
California
Rating - 0%
0   0   0
Contact seller
I am in the final steps of getting my project 1974 Plymouth Duster running. I swapped out the /6 and am just now realizing I need a water pump pulley to fit the 318. If ANYONE has one or can point me in the direction of one, it would be greatly appreciated!
 
Does you car have power steering, or a/c, or both, or none?
The pullies are different so need to be more specific.
 
I have power steering but no A/C. Jomoper do you have one that would fit those requirements?
 
iv got a matched set.double crank and single pump...fresh crohoned primered and painted black..60 plus shipping or .....im in antioch cal 94561...j
 
In my reading and experience, it is best to get a matched set, since many combinations. Even then, the damper sometimes varies in thickness. rehrenberg sells spacers on e-bay to better align your pulleys.
 
I have water pump pulleys but would need more info on what crank balancer and pulley you are using PM me
 
Mancini Racing has the crank, water pump pulleys and alt brackets brand new if you don't want to run used.
 
Status
Not open for further replies.
-

Back
Top