Need Engine Swap Help.

[mopar_1974]

hey guys, i am planning on swapping my /6/904/7.25 for a 360/727/8.25. I am going to lift the car and drop the k-member and replace it with one that is ready to go. i plan on doing this the weekend before i move so i really can't afford a hold up. I need to make sure i've got everything so i don't have to stop 10 minutes into the job. i need a checklist of everything i will need so i dont forget anything (almost already forgot a carb gasket until a friend reminded me), and any tips that will make this go as smoothly as possible. Thanks, Eric

 

[mopar_1974]

bump to top

 

[crackedback]

Get the torsion bars out, upper control arms free, pull the steering column, back/out, disconnect brake lines and all linkages/wiring to eng/trans.

That's some off the top of my head.

 

[DartSportGreg]

Make sure you have a driveline that is 45 inches center to center and the correct slip yoke on it.