[Found!] Need V8 904 Core or Case in So Cal or So Nevada

-
Status
Not open for further replies.
G

GTX JOHN

FABO Gold Member
FABO Gold Member
Joined
Dec 12, 2009
Messages
3,312
Reaction score
4,771
Location
Boulder City NV.
Rating - 100%
115   0   0
Contact seller
My boy broke the rear end in his 10 Second 360 Valiant
and destroyed the overriding clutch. It is pressed in not
bolted like 727. I would like to find one I can pick up in
So Cal or Nevada soon. He is qualified and entered in Div 7
Bracket Finals next week and l have built a new rear end and
installed it before we found trans was broke.

I will pickup and pay you for it if you have an extra one!
 
Thanks!
However = Ancient ball and trunnion early 60s junk.
Most everything is different inside.
Need 67 up.

He wiped out front pump assembly and
66 back are different splines as Ink I recall.
 
John,
I have a 73 904 out of a barracuda with a converter you can have but I’m clear in Michigan.
 
I've got a really nice 904 out of my old '67 barracuda with a 273 commando, so it's probably got certain special parts (governor springs or?) . I converted the car to a 4-speed and this trans has less than 100K original miles on it, and I'm pretty sure it's never been opened up/rebuilt. It comes with the torque converter also. $250
 
John, I have one out of a 69 dart 273. Is a core without the valve body. I am in Tucson, you can have it. I might be going to San Diego at the end of next week, I can bring it with me, let me know. TY,
Rob.
 
GTX JOHN said:
My boy broke the rear end in his 10 Second 360 Valiant
and destroyed the overriding clutch. It is pressed in not
bolted like 727. I would like to find one I can pick up in
So Cal or Nevada soon. He is qualified and entered in Div 7
Bracket Finals next week and l have built a new rear end and
installed it before we found trans was broke.

I will pickup and pay you for it if you have an extra one!
Click to expand...
I also have a 67 up 904 V8 trans you can have for free if needed.
I’m about 3.5 hours from Boulder city in AZ by Prescott.
Was loosing a planetary but still driving.
 
GTX JOHN said:
The sprag is pressed in the very tight.
I believe that it would need to be machined out of the case and
past me skill lever!
Click to expand...
Iv't never used one, so I don't know. I just knew they were available. Why not give them a call and get the particulars, if nothing else works out for you.
 
T
dart_man440 said:
John, I have one out of a 69 dart 273. Is a core without the valve body. I am in Tucson, you can have it. I might be going to San Diego at the end of next week, I can bring it with me, let me know. TY,
Rob.
Click to expand...

Thanks!!!
I crawled thru toe So Cal Junk Yards and got 2 today
I appreciate it a lot.
 
Status
Not open for further replies.
-

Back
Top