[SOLD] New Brass A Body Radiator

[blewbyoutobad]

I have a new in box A-Body radiator. Not sure of the brand. The inlet is bottom right as a 70 and up uses. It will fit earlier A-bodies but will require a water pump and lower hose swap. Fins are nice and straight and no dents in tank. Has auto tranny cooler built in. Never used. $205.00 plus ride. I'm in the Houston area. This is a 2 row radiator.
Thanks FABO

 

[74DartSwinger360]

22 or 26 inch?

 

[blewbyoutobad]

This is a 22" with the factory mounting angles for 24" PATTERN. I have a 69 and 70 Swinger 340. What does a 26" fit? Isn't that a B body?

 

[74DartSwinger360]

no its a body too 26 inch is hd cooling and 340 cars and some cars with ac. My 73 340 Duster came with 26 inch rad from factory

 

[blewbyoutobad]

Is the radiator support width opening larger to handle the 26"?

 

[74DartSwinger360]

Is the radiator support width opening larger to handle the 26"?

Yes I t is easy to change a car to a 26 cause the mounting nuts are there already

 

[fishy68]

Yes I t is easy to change a car to a 26 cause the mounting nuts are there already

Not on older A-bodies. My 68 only has the mounting nuts for a 22" radiator. It's not a big deal to drill but you also have to cut the opening bigger or you don't gain anything.

 

[blewbyoutobad]

Anyone know what motor would have used a 2 row?

 

[74DartSwinger360]

Anyone know what motor would have used a 2 row?

My Factory 73 340 Duster uses one but the tanks are much smaller. If you were closer it would be in my garage

 

[fishy68]

Anyone know what motor would have used a 2 row?

If I'm not mistaken a 2 row was the std. radiator on a small block.

 

[blewbyoutobad]

Price Drop $180.00 plus ride.

 

[blewbyoutobad]

Part is back on the market. Sale did not go through due to technical mismatch of part. This was no fault of either party.
Thanks FABO

 

[blewbyoutobad]

Bump still available