[SOLD] NEW Crane Powermax Cam and Lifter Set

-
Status
Not open for further replies.
Hmmm. I think I like those numbers.

Kinda half and half between the Mopar 474 and 480/484 or 509.

Probably too much for my build and too early as well, but...

What's the advertized rpm range?
Any machining necessary for the springs to work?
 
YY1 said:
Hmmm. I think I like those numbers.

Kinda half and half between the Mopar 474 and 480/484 or 509.

Probably too much for my build and too early as well, but...

What's the advertized rpm range?
Any machining necessary for the springs to work?
Click to expand...


This shouldn't require any special machining for the heads since it is below .500" lift.


Put me in line if YY1 doesn't want it.
 
krazykuda said:
This shouldn't require any special machining for the heads since it is below .500" lift.


Put me in line if YY1 doesn't want it.
Click to expand...


No PM's on it yet, there is no line to get on! BTW, added bonus to this thing is that the box looks to be ten years old or better, meaning there's a good chance everything inside is good ol USA metal. When I hunt parts or my own builds I look for old packaging for that extra bit of insurance.
 
PM sent. If YY1 doesn't take it, I will.

Also sent PM to YY1 to give him first chance at it since he posted first.
 
Status
Not open for further replies.
-

Back
Top