Thanks guys, well for a drive-train, I drug home a 84 W250 150miles in 95deg heat w/ a 30mph side wind with none other than a worthless tow bar that the state finds safer than a tow rope
. Good thing I only payed $500 for the truck or it wouldn't have been worth it. My dodge was tired when it got home thats for sure
The donor's got a 360/727/208 w/ hd44/60 w/ 3.55 gears, not intirley sure on the gears just yet. I plan on a discs brake conversion in the rear and either a 4" lift w/ 33's/3.55 or 6" lift w/ 35's/4.10 w/ a detroit in the rear and ARB up front w/ hyd assisted steering. Havn't decided what wheel/tire package just yet. Either cheap steel forward directionals like I have, or some Micky classic locks. Either way she'll have bfg's, either A/t's or M/T's. I dont like the new line of M/T, it seems as BFG dropped the first gen M/T's so I'll probable go A/T, they'd last longer anyway. Then if I can find a 4spd/205 and 60 front I'll put that in too. I'm only 22 so this truck has years of transforming ahead of it. Heres the transformation so far.
1993
1998
2002
2006
2009
striped all the trim off to give body shops a good assessment for estimates.
The rust was pretty bad on the box and rocker/door area, but I got a box off of a 91 for $950 that lived its life in arizona so it was completely rust and dent free w/ original paint. You can barley see it on the trailer upside down. She also needed a new front driver side 1/4 pannel and floor pan but the rest of the cab/doors/rockers the body shop "attempted" to save (key word attempted). My rockers are bubbling already
.
I decided to leave the trim off as it looks tacky up close and retains too much moisture that would just rot the body again. Although I might get some new wheel-well moldings and some chrome side handle's for the cab but that would be it for trim.
For the rest of the body, if I cant find a strait rear step bumper like the one I got or get mine straightened and re-chromed. I'll probably go w/ a roll pan. I also thought about a chrome or flat black roll bar w/ a lund visor and a fiberglass flip front clip from USBody. Like the photos bellow, accept the first one isn't fiber glass but I like the wheel and tire package and especially the roll and nurf bar. The green ramcharger is the front clip I'm referring to. Idk I like it, its unique, light, and wont rust and only cost 1,500. The R/T hood thats on there now was half that.
Glad to see you guys like my truck though. Means the most when true mopar fans appreciate what you got :thumleft:
If anyone has some pics of their 4x4 or 4x2, post em up I'd like to see em...