Hankrebel
Well-Known Member
Yep, just went out there and found them and removed the clutch and fan.There are clearance holes in the base of the clutch that you put a bolt through... You have to keep the pulley from rotating while installing and removing it...
With the clutch and fan removed, I can get the radiator in place.
But there is still a problem with the core supports.
While the driver side of the radiator is pushed flush with the support, the pasenger side has at least 1/2 inch of space.
![20190928_202056.jpg](https://i57.photobucket.com/albums/g235/Hankrebel/71%20Dart%20Swinger/20190928_202056.jpg)
Last edited: