Newbie from NE Ohio

-

HellDart

Member
Joined
Jan 4, 2022
Messages
9
Reaction score
12
Location
Ohio
Hi all, just bought a 70 Dart project car, its actually being shipped here from AZ now. Plans are for it to be a fairly hot street/strip drag week type car with a hotter than stock Hellcat platform engine. Ill be posting picks as I go. Its headed to my chassis shop for rear end and cage work a few weeks after it arrives. It has an alterkation front end under it now. We are doing mini tubs with a 9" rear and 4 link. While this will be my first A body, I have had a 1320 Challenger and a Hellcat Challenger previous and have raced everything from top sportsman to Blown gassers. I am also the lead sales/tech here at Cometic Gasket, so if you have any questions feel free to message me.
 
Welcome to FABO!!

Sounds like a really fun project!! Looking forward to following along.
 
Nice to have you aboard. Welcome from Socal.
 
Hi all, just bought a 70 Dart project car, its actually being shipped here from AZ now. Plans are for it to be a fairly hot street/strip drag week type car with a hotter than stock Hellcat platform engine. Ill be posting picks as I go. Its headed to my chassis shop for rear end and cage work a few weeks after it arrives. It has an alterkation front end under it now. We are doing mini tubs with a 9" rear and 4 link. While this will be my first A body, I have had a 1320 Challenger and a Hellcat Challenger previous and have raced everything from top sportsman to Blown gassers. I am also the lead sales/tech here at Cometic Gasket, so if you have any questions feel free to message me.
Where at in ne ohio?? 44460 here!
 
Painesville. We are neighbors. Lol.
90 minutes! You'll have to post some pics. I have conetic gaskets in my dart, and have a hellcat longblock here in my garage for a B body project. Destined to be buddies ! Lol
 
5CAFEA1C-8640-47A5-A258-4637094C6287.jpeg
 
Hi all, just bought a 70 Dart project car, its actually being shipped here from AZ now. Plans are for it to be a fairly hot street/strip drag week type car with a hotter than stock Hellcat platform engine. Ill be posting picks as I go. Its headed to my chassis shop for rear end and cage work a few weeks after it arrives. It has an alterkation front end under it now. We are doing mini tubs with a 9" rear and 4 link. While this will be my first A body, I have had a 1320 Challenger and a Hellcat Challenger previous and have raced everything from top sportsman to Blown gassers. I am also the lead sales/tech here at Cometic Gasket, so if you have any questions feel free to message me.
Hi all, just bought a 70 Dart project car, its actually being shipped here from AZ now. Plans are for it to be a fairly hot street/strip drag week type car with a hotter than stock Hellcat platform engine. Ill be posting picks as I go. Its headed to my chassis shop for rear end and cage work a few weeks after it arrives. It has an alterkation front end under it now. We are doing mini tubs with a 9" rear and 4 link. While this will be my first A body, I have had a 1320 Challenger and a Hellcat Challenger previous and have raced everything from top sportsman to Blown gassers. I am also the lead sales/tech here at Cometic Gasket, so if you have any questions feel free to message me.
 
Welcome aboard Mickey! I walked over to the tent at the classic to say hello, but you were out. Will you be campaigning the gasser this year?
 
Welcome aboard Mickey! I walked over to the tent at the classic to say hello, but you were out. Will you be campaigning the gasser this year?
No more gasser. Sold it a couple years ago. Just running my kids dragster for now until the Dart is ready.
 
Your build plan is what I dream about at night. Looking forward to it and hopefully after I finish remodeling and selling my house, I’ll be able to make some progress too! Any ideas on how you’ll approach fitting the engine up front?
 
Welcome, Maybe you will have it all buttoned up for Mopars at the Junction in June.. Usually it's a blast.
I may not be there this year due to family vacation but you should go!
Welcome from Irwin PA.
 
Your build plan is what I dream about at night. Looking forward to it and hopefully after I finish remodeling and selling my house, I’ll be able to make some progress too! Any ideas on how you’ll approach fitting the engine up front?
The car has an Alterkation front end under it already for the gen 3 hemi. I will also be using a front engine and mid plate. Ati SFI case for the turbo 400 with their bellhousing that adapts to it.
 
Welcome, Maybe you will have it all buttoned up for Mopars at the Junction in June.. Usually it's a blast.
I may not be there this year due to family vacation but you should go!
Welcome from Irwin PA.
Not this June, this will take me a couple years I’m guessing. Mostly acquiring parts this year.
 
Wow that will be one nice build. You have a great looking start with some nice work that has ben to your ride already.
It's nice to have someone on board that has a great back ground like yourself.
 
-
Back
Top