Offset keys or bushings?

[KenZ]

We degreed the Summit cam we are installing in the 318 for my daughter's Duster and it needs to be advanced 2 degrees to match the cam card. Which method is most common? Offset cam key? Offset cam bushings? Offset crank key? And, where's the best place to get it?

Thanks,
Ken

 

[ramcharger]

Offset cam key, Mancini has 'em. Bushings are for B/RB/Hemi.

http://chucker54.stores.yahoo.net/ofcamkey.html

 

[KenZ]

Thanks Ramcharger.

As for installing it, I believe it would go in like this as viewed from the front of the engine and the key at the top of the cam.

|
|
--
..|
..|

Is this correct?

Thanks again,
Ken

 

[ramcharger]

Ken, that would be correct. The cam gear needs to be moved toward the crank direction of rotation as you need to advance the timing events 2 degrees.

 

[POS Dakota]

Offset cam key, Mancini has 'em. Bushings are for B/RB/Hemi.

http://chucker54.stores.yahoo.net/ofcamkey.html

Holy 56.95 for those batman!!!! Damn..that seems a bit mucho man. No?

 

[KenZ]

Thanks again Ramcharger.

Holy 56.95 for those batman!!!! Damn..that seems a bit mucho man. No?

Yeah, that's what I thought when I saw that. Oh well, whatcha gonna do?

:dontknow:

 

[POS Dakota]

Thanks again Ramcharger.




Yeah, that's what I thought when I saw that. Oh well, whatcha gonna do?

:dontknow:

Get out the debit card, and suck it up I guess. hehe
They're right down the road from me. Good place to have around.
You take the good with the bad. I've scored some awesome deals there in the past.

 

[ramcharger]

Holy 56.95 for those batman!!!! Damn..that seems a bit mucho man. No?

Yeah, they've gone up. As far as I know, no one makes a fully adustable timing chain set yet for SB Mopars.