[FOR SALE] Original 1966 Barracuda

-
Status
Not open for further replies.

boosted

Life Needs Air
Joined
Oct 26, 2008
Messages
1,414
Reaction score
397
Location
Muscogee/Harris County GA
Rating - 0%
0   0   0
Contact seller
Factory 273 V8 a/c ps car. 100% complete and original. Sorry for the bad pictures just have not had time to clean the car up yet.. Was going to make a build out of it.. but I still want a 30's truck.

Make a reasonable offer on it. Needs complete restoration.

Located in Midway Alabama. Bill of Sale only. If I had to make a price I would say $1500 would take it home.
 

Attachments

  • IMG_20151107_133142895 (Custom).jpg
    38.6 KB · Views: 688
  • ResizedImage_1447112674846 (Custom).jpg
    123.7 KB · Views: 626
  • IMG_20151107_150226972 (Custom).jpg
    46.3 KB · Views: 634
  • IMG_20151107_151611479 (Custom) (2).jpg
    51.9 KB · Views: 626
  • IMG_20151107_145749721_HDR (Custom).jpg
    36.2 KB · Views: 624
  • IMG_20151107_133130905 (Custom).jpg
    39.4 KB · Views: 645
  • IMG_20151107_133044939_HDR (Custom).jpg
    44.5 KB · Views: 646
  • IMG_20151107_133039366.jpg
    35.4 KB · Views: 662
Seem a little funny that most of the car is in VERY rough shape, but the vin plate is perfect? Were they held on with pop rivets? Also why is the fender tag so clean and not on the car.
 
Seem a little funny that most of the car is in VERY rough shape, but the vin plate is perfect? Were they held on with pop rivets? Also why is the fender tag so clean and not on the car.

but the vin plate is perfect? If you look at the photo you can see it very clearly that it is riveted on. Windex does a good job.

Also why is the fender tag so clean and not on the car. As everyone knows the fender tag is held on with phillips head screws. It was much easier in the rain the night the car came home to unscrew it and clean the fender tag so it could be decoded.

Most anyone who has been in the mopar hobby would like to know what the car came with. I can make the extra effort I guess to put the two screws back in it before it sells so the next person will not make me out to be a rip off.

As far as being very rough.. Well that will depend on your ability to turn a wrench or just right a check for a car.
 
Could you take another pic for us of the front grill. I assume it has a 904 tranny with 7 1/4 rear. Thanks
 
Here are the other pics
 

Attachments

  • ResizedImage_1448889487533.jpg
    26 KB · Views: 401
  • ResizedImage_1448889488256.jpg
    29 KB · Views: 395
  • ResizedImage_1448889487896.jpg
    33.3 KB · Views: 410
  • ResizedImage_1448889486155.jpg
    28.2 KB · Views: 404
  • ResizedImage_1448889487180.jpg
    30.6 KB · Views: 399
  • ResizedImage_1448889488601.jpg
    30.8 KB · Views: 398
  • ResizedImage_1448889489512.jpg
    28.6 KB · Views: 403
  • ResizedImage_1448889486752.jpg
    27.1 KB · Views: 393
Motor is about to come out. It is froze up from sitting so we are going to try and get it freed up and running. Of course the price is going to change to reflect the work being done. This car has it's original motor, trans everything.
 
That's a nice little ride, just a little too far for me. Good luck Boosted. The price seems very reasonable.
 
Yea I hate to let the dirt track people get it... They are starting an 45 years and older class. I have a guy who wants it for that but I am holding off on it..
 
Status
Not open for further replies.
-
Back
Top