[WANTED] Overdrive shifter and rods

-
Status
Not open for further replies.
bdusted440

bdusted440

Well-Known Member
Joined
Jul 29, 2012
Messages
511
Reaction score
58
Location
machesney park
Rating - 100%
6   0   0
Contact seller
I need an overdrive shifter handle and shift rods if anybody’s got one I’ve got a brand new set of four-speed standard rods and a shifter I could trade or sell
 
I have a couple of the shift rods for the OD box
 
i’ll have to check i think I have 1-2 and 3-4
any chance you know the overall length of the 3-4 linkage rod?
 
All you need is the 3-4 shift rod and the truck O/D 3-4 arm. The rest will work if you have an A Body Hurst shifter and linkage.
 
The front one

9E741724-AB5F-45C9-80EB-33AD770AC0EF.png
 
I’m not sure there is a difference in the shifter and the rods between the two except for the fact that the 3-4 lever is installed upside down for the od transmission.
 
mcodecuda said:
I’m not sure there is a difference in the shifter and the rods between the two except for the fact that the 3-4 lever is installed upside down for the od transmission.
Click to expand...

The rod and arm is different. Check Brewers Performance. Everything else A Body will work.
 
mcodecuda said:
I’m not sure there is a difference in the shifter and the rods between the two except for the fact that the 3-4 lever is installed upside down for the od transmission.
Click to expand...
Looking at post #6 it appears that the 3-4 rod would be different for a 3-od transmission. I suggest you talk to Jamie at Passion Performance to determine what you need or Brewers as suggested above.
 
Status
Not open for further replies.
-

Back
Top