Oversized lifter

[Beaglehunter]

Hello I am building a 1972 dodge demon 340 and found dreaded diamond on motor. I am looking for .009 hydraulic lifter/ motor bored at .914. If anyone has any ideas on where I can find please let me know. The motor is already built n would hate to have to take it apart again to sleeve. Any suggestions? Thanks

 

[Rocky_JS]

I assume you know which one is loose?
Perhaps try Mike at MRL performance (FABO Vendor and member)
http://www.forabodiesonly.com/mopar/member.php?u=18781
http://www.mrlperformance.com/
See if he can source or has the lifter you need.

 

[mderoy340]

If you still have the old lifter you could get the face resurfaced.

 

[william]

Some info here
http://www.forabodiesonly.com/mopar/showthread.php?t=254810&highlight=Oversized+lifter
It's .921" but may help

 

[RustyRatRod]

Call Oregon Cam.

 

[mderoy340]

http://www.forabodiesonly.com/mopar/showthread.php?t=254810
looks like you need to PM zippie 7

 

[67Dart273]

.............or have the block bushed for smaller lifter(s)

 

[Beaglehunter]

Thank you all for your help. I guess I'm going to try n have it resurfaced.