Painless Wiring harness for a 1969 barracuda

[hemifish69]

Bought one, and it's installed forward of the firewall. Aft of the firewall, not so much.

Any advice? The wiring diagrams that came w/ the harness are not the greatest.

 

[MR.7DUSTER3]

Take your time and read the instructions and then re-read them again, when we did ours a couple of years ago we thought the same thing. but it turned out to be fairly easy once we slowed down.

Bob / Bryce

 

[Mopar2]

best thing about painless is the telephone tech support if you have ANY questions call them and you have an instant answer thats correct

 

[6dart9]

Did mine not that long ago. I have a 69 dart. The thing to remember is not to wire it how the car was but how the electrical circuit would work theoretically. Once I got off the kick of wiring how it was I buzzed through it.

I did use aftermarket gauges not the stock ones so it made it a tad easier as well.

good luck and take your time and you will be fine