part

[randysglide]

I am looking for the plastic peice that connects the single line from the washer pump to the two lines that connect the nozzles. What is this called and where can I find one. It is for a 74 dart swinger Thanks

 

[onehellofadart]

You can find the hose connectors and t's at any parts store.

 

[randysglide]

thanks I will have to look at more stores as the ones I have been to didnt have anything like it or close thanks again

 

[cudajim]

You can get the correct "T" at Laysons.com. Not the best quality as you have to trim it with an exacto Knife but at least it's 98% correct.

thanks I will have to look at more stores as the ones I have been to didnt have anything like it or close thanks again

 

[Suregrip391]

Check the "HELP" line at any auto parts/Napa store in your area. They will sell plastic T's. Good luck!

 

[65Val]

There are tons of 'em in the wreckers...Mopar used the same design for many years. Check vans and trucks too. They are called a "Windshield washer T"

 

[H22A4]

There are tons of 'em in the wreckers...Mopar used the same design for many years. Check vans and trucks too. They are called a "Windshield washer T"

Yeah but most of them are busted already or will bust when taking off the old hose. I was down at Wildcat yesterday and the ones which were not already busted were third party (not original). I found one original one which wasn't busted, cut the existing hoses off a few inches upstream of each of the plastic pieces and took it home to take my sweet time cutting off the hold hoses. Managed to get the old hoses off w/o breaking the "T" but the next test will be not breaking it when I connect it up to my firewall.

Good luck!