[SOLD] Parting out 2 Fastbacks

-
Status
Not open for further replies.

RAT ROD AL

MOPAR ARCHEOLOGIST - one parts hoard at a time!
FABO Gold Member
Joined
Jan 18, 2013
Messages
8,814
Reaction score
12,355
Location
Lecanto Florida
Rating - 100%
288   0   0
Contact seller
One 67 ,one 68.
20240720_143005.jpg


Have good glass. A couple good frame front rails . One good trans / T bar Xmember.
Misc metal brackets. Front suspension parts ,all drum..
Couple good 67 doors. Loaded.
Trim parts.
No 68 windshield trim unfortunately.
68 had its interior in place. Buckets and console.

Screenshot_20240802_074522_Facebook.jpg

Dash with both pads.
2 floor shift steering columns.one P/S ,One manual.

V8 K frames

I have some parts off and going through them. Watch for pics and prices as I post them here.
If you need anything PM me !
As always, Thanks for looking !
 
Have one driver side 67 fender ,no rust but has a slight dent / ripple above the wheel opening. $ 500 obo. Local pick up would be best !
20240726_091235.jpg
 
SOLD !!!
68 Dash frame. Not cut up. has some rust pitting on the bottom . $65. Ash tray not included. You don't see that !!
20240802_185156.jpg
20240802_185227.jpg
20240802_185206.jpg
 
Last edited:
I also have a 67 dash in about the same condition, same price. Will post pics if any interest !
 
More parts , being sold as rebuilder core. All plus shipping.
All off 68 barracuda




Not sure if a 3sp or variable spd if there is a diff. Wire harness intact.
$40

20240801_175308.jpg


Power brake assy $30 for what you see. SCRAPPED !!!!!

20240801_184544.jpg


Heater blower with plastic fan and mounting hardware. $15
20240801_175758.jpg


A pair of prestolite Hi & lo horns. $10

sold
20240801_172316.jpg



Again , Thanks for looking.
 
Last edited:
67 taillights . Not great but complete.
$40 for the pair plus shipping. PayPal F&F or MO.
20240801_182613.jpg
20240801_182629.jpg



And 1 69 taillight $30
20240801_182444.jpg
20240801_182458.jpg
 
Last edited:
I'm looking for the console shifter indicator assembly complete (indicator housing, blue bulb cover, PRND21 clear lens, black plastic backing for lens, and black plastic shifter slider) - see attached photo for example. And if you also have the bulb socket and needle indicator for it, that would be great. Thanks, Dave

console shifter indicator.jpeg
 
I'm looking for the console shifter indicator assembly complete (indicator housing, blue bulb cover, PRND21 clear lens, black plastic backing for lens, and black plastic shifter slider) - see attached photo for example. And if you also have the bulb socket and needle indicator for it, that would be great. Thanks, Dave

View attachment 1716301770
I'll see what I can come up with. That's all in there. Just check the condition and get some pictures.
 
Status
Not open for further replies.
-
Back
Top