parting out the whole yard except my project cars

[waggin]

have a dash pad,dash bezals are here also but cut for radio,have taillights for the 71 dart with four lights in the bumper,have antenna setup just pulled from a 72, I have some door panels with woodgrain in black...not sure what I have for armrests will digg for them

Looking for 1970 Dart dash bezels and dash pad..pad does not to be nice,looking for one to recover,and looking to a set of tail lights, antenna set up, in the one pic looks like you have the dash parts I am looking for (blue Car), front and rear black door panels and armrests. Thanks for your help !!

 

[waggin]

I have one left unequal length snorkels....

have any

 

[alleycat81448]

need headliner rods or bows with the clips 1967-1969 2 door dart, thanks

 

[waggin]

anybody know if a 71 dart has the same bows?

need headliner rods or bows with the clips 1967-1969 2 door dart, thanks

 

[Wrencher]

hey Waggs, got a cure for this???

'66 model

 

[waggin]

sure thing....fill them two holes and change your first name? oh crapp white tape over them and yur done!!! I actually might have a "D" in my collection hope its the right year...I'll have your address I'm thinkin soon enough?

hey Waggs, got a cure for this???

'66 model

 

[Wrencher]

Well a fella suggested I find an "F" in my wanted thread, lmao

Yea, I'll pm you my info in a bit
Thanks

 

[Bobby_k]

heres more pics

Do you still have those aluminum slots? Would they fit a 66 cuda?
Bobby_k

 

[6pakattack]

PM sent,looking for Rocker Mouldings for '68 'Cuda !!

 

[moparmat2000]

hey wags

do you have a drivers side pair of A body bucket seat tracks 67 to 69 model

LMK
matt

 

[waggin]

no sir....

hey wags

do you have a drivers side pair of A body bucket seat tracks 67 to 69 model

LMK
matt

 

[red 64 valiant]

How about a gas tank fill tube for a 64 valiant 1 3/4 inch diameter

 

[waggin]

Yepp got one...

How about a gas tank fill tube for a 64 valiant 1 3/4 inch diameter

 

[War1]

Hello Waggin. I was referred here by a member and wanted to see if you had 1) a single headlight bezel for a 65 Valiant 200 and 2)Quarter panel trim for the same model (Convertible)?

 

[red 64 valiant]

Thanks but already found one

 

[red 64 valiant]

How about speedo cable with threads on one end and clip on trans?

 

[waggin]

i never seen one like that?

How about speedo cable with threads on one end and clip on trans?

 

[Fishercuda]

Any chance you have a couple headlamp bezels for a 65 barracuda and a trunk prop arm?

 

[pbiggs]

Hi...happen to have a early A body driver side remote mirror?
Thanks, Pat

 

[waggin]

trunk prop arm I got.....headlight bezals....needle in a haystack, if you want some that can be painted I would consider doing up a set,I have plenty of bent ones that I can make pretty in paint

Any chance you have a couple headlamp bezels for a 65 barracuda and a trunk prop arm?

 

[waggin]

No sir

Hi...happen to have a early A body driver side remote mirror?
Thanks, Pat

 

[Fishercuda]

PM sent in regards to trunk arm. Thanks!

 

[Rocky_JS]

I'm starting to think this is a farced err forced intervention lol but while im here.... any antenna masts for 67 cuda? =)

In some circles they would refer to that stash as a hoarde.

 

[waggin]

I havent had much luck finding anything for 1967.......go figure.... that is my date of manufacture....

I'm starting to think this is a farced err forced intervention lol but while im here.... any antenna masts for 67 cuda? =)

 

[eaw4209]

I am in need of a trunk lid and trunk trim for a 67 dart. can you help?