[SOLD] Parting several A bodies. Project cars also.

-
Status
Not open for further replies.
Looking for a fold down back seat, All brackets, hinges, trim panels, and even bolts/screws.
Possibly looking for factory crank open sun roof and all associated parts...
 
Hi again. I need the following for a 2 door 68 Dart.
-Trunk light socket, switch and wire
-square black dash defrost vents (sit next to speaker on top of dash)
- windshield trim molding, nice, no dings. Only the lower cowl piece if possible. If not the whole set no dings or bends.
 
Hi,
I‘m looking for a set of the front header panel individual letters spelling “PLYMOUTH” for a 1967 Barracuda. Any chance you have a set in very good shape?
Thanks
Steve
 
Looking for a Antenna lower radiator to k member support bracket and a left lower control arm with sway bar tab for a 67 Barracuda
 
Do you have a fender splash shield for a 72 Scamp and wanting the top part of a drivers inner fender for 67 up a body?
 
Do you have any 1968 dart GT door panel emblems? One like this. Or any seat emblems?

IMG_3959.jpeg
 
Status
Not open for further replies.
-
Back
Top