Pass Side Kick Up Hanger

[gerahead]

I am installing a 340 into my 71 Dart and I want to replicate the factory exhaust system. My car does not currently have a hanger on the passenger side kick up. I see that this hanger is being repopped and can either be welded in or bolted in.

My question is......... did they weld or bolt these in at the factory and where exactly was it mounted? Does anyone have a picture of where/how it is mounted, or can someone take a pic that would show the location? Thanks for the help! L8r

Jim

 

[godfatherofchry]

all the ones I have seen are bolted and should be in the same place as the other side im sure sumone like yearone could help you out....hop this helps....Artie

 

[jerry6]

does this help ?

 

[gerahead]

does this help ?

Jerry,
Yes, this does help. I would like to see a little more of the detail at the top of the figure. Is this available on line? Could you send me a link? Thanks for the help. L8r

Jim

 

[jerry6]

download the manual from here 1970 dart challenger service manual
http://www.forabodiesonly.com/mopar/showthread.php?t=132309

 

[gerahead]

download the manual from here 1970 dart challenger service manual
http://www.forabodiesonly.com/mopar/showthread.php?t=132309

Perfect! Thanks for the tip. L8r

Jim

 

[doug 371]

if you take out the back seat, you will find 3 dimples in the floor ready for you to drill...pics later...