Any ideas on what brand/Type piston this is on my 340? I know they are flat pistons just never seen one like this with this bullseye center and look to be positive height over deck, feedback would be great!
Piston Identification
- Thread starter madhatta360
- Start date
-
Look like Speed Pro 2316 forged pistons to me.
Clean off the top one and see if you don't see a number that says like L2316.
Clean off the top one and see if you don't see a number that says like L2316.
L2316.030 Speed Pro Forged Pistons Set of 8 340 Mopar Chrysler | eBay
<p dir="ltr" style="margin-top:0; margin-bottom:0;">L2316.030 Speed Pro Forged Pistons Set of 8 340 Mopar Chrysler. These were installed with aftermarket heads and the valves were too big so the guy dented the valve pocket on one side before removing them. They are in excellent condition other...
www.ebay.com
TRW is owned by Speed Pro, who is owned by Seal power, who's owned by Federal Mogul
And sometimes sold as "Manley", "DCC", "Mopar Performance", Etc.
Nice thanks everyone think I found the specs here: Dodge Chrysler MOPAR Plymouth 1968-1971 340 V8 FORGED Coated Pistons and Rings Kit (L2316F KIT) – Engine Parts Centers Online Store
-
