Pitman arm for 65 valiant

[Xcvbn]

Rock auto sells a pitman arm (7074) listed for a 65 valiant. I understand this might not be the correct one. Can anyone clarify if this is compatible or not? Thanks.

 

[69FBCuda]

Looks just like the one from my 65 Barracuda

 

[Demonracer]

Check this item number out on Ebay. 312280413701

 

[S'cuder]

Other sources show the Moog K7074 as being for the 1967-72 A-Bodies. Since Moog was an aftermarket leader in chassis parts at the time, other companies often used their numbers.

The part number you need, according to the Mopar catalog is 2072573. I show a source that crosses this to Moog K7020. Don't take this as fact, just a tool for further research. Maybe early A-Body guys can weigh in, they're the experts.

Firm Feel PAA1 would do the trick.
www.firmfeel.com/a_body_mopar_pitman_idler_arm.html

 

[cudamark]

The old TRW number is 18665. The old NAPA number is KA-484. That might help you find a good old Made in USA version. All the '62-6 A-bodies used the same one.

 

[S'cuder]

Here's a couple options. Neither are inexpensive.

20112 - PITMAN ARM

Same part on Ebay:
Front Steering Pitman Arm 1pc for Dodge Plymouth Barracuda Dart Rare Parts 20112 | eBay

NOS MoPar 1962 63 64 65 66 Plymouth Valiant Dodge Dart Steering Pitman Arm Abody | eBay

 

[Xcvbn]

Thanks everyone, this is very helpfull. I don't understand why rock auto is selling that. I think I need to tell them they've got it wrong!

 

[S'cuder]

I found one more part number you can add to your list. FA-436 is probably a McQuay-Norris part. If you find one, scoop it up. But, it's likely easier to find unicorn tears.

 

[69FBCuda]

Rock auto sells a pitman arm (7074) listed for a 65 valiant. I understand this might not be the correct one. Can anyone clarify if this is compatible or not? Thanks.

Where are you located?

 

[Xcvbn]

Where are you located?

Windsor, ON, Canada

 

[PST]

We have a pitman arm for a 65 Valiant if you haven't located one yet.

Pitman Arm