[Found!] Power steering box fitting

-
Status
Not open for further replies.
68brcuda

68brcuda

Active Member
Joined
Apr 27, 2013
Messages
37
Reaction score
11
Location
Central New Hampshire
Rating - 100%
1   0   0
Contact seller
Located on PS box, 90-degree brass fitting that the PS hose connects to this.

ps1.jpg
 
Mopar used two versions of that fitting, the earlier ones were a smaller size on the hose fitting side... That looks like the later version but I can't be sure....

Substitutes made of plated steel are readily available, brass has been out of production since the late 70's.... If you want functional steel is great.. If you want to satisfy judges at a NHOA event keep looking & I wish you luck...
 
1WildRT said:
Mopar used two versions of that fitting, the earlier ones were a smaller size on the hose fitting side... That looks like the later version but I can't be sure....

Substitutes made of plated steel are readily available, brass has been out of production since the late 70's.... If you want functional steel is great.. If you want to satisfy judges at a NHOA event keep looking & I wish you luck...
Click to expand...
I'll go with steel, if I can find one, any suggestions as to where to start, TIA...
 
I found a brass one at a local Parker hydraulic supply store a couple of years ago...
 
Status
Not open for further replies.
-

Back
Top