Power to Manual Steering How To?

[Hyperballsmcgee]

want to convert my 74 Scamp to manual steering. what do I need? how do I do it? motor is a 73 340, all steering and suspension is bone stock as car as I know, save for Monroe Matics ups front and Monroe Air springs out back. please don't give me any partial info either, I just want the bare bones laid out, as said earlier, what do I need? how do I do it?

 

[A68DART360]

manual steering box, manual pitman arm for box, an splined adapter that goes on the end of the column to make it longer to make up the connection between the column and the manual steering gear. It's been a while since I did one so I am sure someone else will chime in if I am forgetting something but this will get you started.

 

[70aarcuda]

be careful about the steering box....your power steering pitman arm will not work with a manual steering box as the shaft diameters are different...which started in 73 on the power steering boxes..

another thing...starting in 73 the drag links were changed......


http://www.bigblockdart.com/techpages/steeringbox.shtml

http://www.bigblockdart.com/techpages/moognumbers.shtml#pitman

 

[BB73Challenger]

All items as said above.

I did the same conversion on my Challenger, was lucky enough to get a used steering box with a good pitman arm on it.
Then used Burning River power to manual steering shaft conversion piece.