[Found!] Pre ‘66 slant six engine mount brackets

[MidnightSwinger]

See picture below, I need the motor mount brackets for my 65 Dart. From my research they need to be from a pre ‘66 slant.

 

[Charrlie_S]

See picture below, I need the motor mount brackets for my 65 Dart. From my research they need to be from a pre ‘66 slant.

View attachment 1716151786

Correct. I might have an extra set. I will kook, today. Just a fyi, you will need a 66 or earlier oil pan and pickup tube, if using a engine from a later year. Also if the engine is 68 or newer and using an 67 or older automatic trans you will need a crankshaft adapter.

 

[MidnightSwinger]

Correct. I might have an extra set. I will kook, today. Just a fyi, you will need a 66 or earlier oil pan and pickup tube, if using a engine from a later year. Also if the engine is 68 or newer and using an 67 or older automatic trans you will need a crankshaft adapter.

The engine is from a 67.

 

[MidnightSwinger]

@Charrlie_S would you also have a pan and pickup tube for my application?

 

[Charrlie_S]

@Charrlie_S would you also have a pan and pickup tube for my application?

I will need to look. But I doubt I have an extra. All my "A" bodies are 64-66 so that is what I use.

 

[MidnightSwinger]

I will need to look. But I doubt I have an extra. All my "A" bodies are 64-66 so that is what I use.

I understand, if you could come up with a spare, it would help me out a lot. I appreciate you looking for the motor mount brackets as well.

 

[bb66cuda]

I may have mounts, oil pan and pickup if interested. I’m in San Jose.

 

[Charrlie_S]

I understand, if you could come up with a spare, it would help me out a lot. I appreciate you looking for the motor mount brackets as well.

I didn't have a chance to look yet. @bb66cuda might be better for you, He is much closer.