[WANTED] Pressure plate bolts.

[circlepilot]

I think I have looked everywhere for these bolts. Need a source (or part number) for 5/16" 18 X 7/8" L, 3/8" 6-point flange bolts for my clutch pressure plate.
Norm

 

[RustyRatRod]

These are it though. The McLeod site shows six while only four on Summit.

McLeod Racing 1513

Free Shipping - McLeod Racing 1513 with qualifying orders of $109. Shop Pressure Plate Fasteners at Summit Racing.

www.summitracing.com

 

[junkyardhero]

gotta buy in bulk but here's an option...

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[RustyRatRod]

gotta buy in bulk but here's an option...

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

Nope. Those won't work. Pressure plate bolts must have the raised shoulder right under the head in order to center the pressure plate. Without that type bolt, the pressure plate will be off center and cause a vibration. I had no problem with the 1/2" head bolts I linked to above and I used a 10" clutch on Vixen with the scalloped pressure plate and there was plenty of room to get to the bolts. I've not found a 3/8" head anywhere. He could also use allen head bolts, but I've not seen those in a pressure plate bolt either.

 

[Jeremiah (jd)]

Brewers, ARP, or my attic will have a set.