Proportioning Valve

[fastmopar]

I need a source for a proportioning valve. I swapped in the front discs from a 75 A body (large bolt pattern) but have the stock proportioning valve for my 72 that came stock with front discs/rear drums.

A bodies in wrecking yards around here are EXTREMELY rare. I'm in the Reno, NV area.

Any help would be appreciated.

Thanks,

fastmopar

 

[7demon2]

are they both for manual disc setups or power? it seems to me you don't need to do anything if it is a manual disc to manual disc swap.

 

[chasduster]

Like 7demon2 said.....you should be all set ith what you have...try it

 

[fastmopar]

Ok. Now I have two different, opposing pieces of input.

This is Power Disc to Power Disc. This car had the Kelsey-Hayes front discs from the factory. I put 75 A body spindles and discs on it for better stopping power and the big bolt pattern.

Does this info helpnarrow down the potential problem with the proportioning valve?

I get this vision of standing on the brake pedal and rolling into a wall.

Thanks,

fastmopar

 

[chasduster]

you should be fine.....with what you have