sleepyswinger
Active Member
can I leave the tranny attached to the engine when I pull the motor on a 72 dart ? Thanks
pulling the motor
- Thread starter sleepyswinger
- Start date
-
V8,/6? Yes,if you have patience. Need to angle,the chain to pull the front higher.A angle plate,would help immensely. If your 1st engine pull ever,ask for an experienced friend. Safety first....
BillGrissom
Well-Known Member
Sure. If you will be working on the tranny too, best to keep them together. Many photos here. Another way is to remove the whole K-frame w/ motor and tranny from the bottom by lifting the body up. Several posts on that. If you will be working on the suspension and steering that is ideal.
sleepyswinger
Active Member
Yes I'd like to rebuild the front end also but I don't want to get to much going at once.
dustya_383
Well-Known Member
Absolutely I pulled my 360 and 4 speed together
sleepyswinger
Active Member
Yes,plan on having the tranny gone thru also,it has a shift kit now but will need to upgrade the converter for the big stick !
-
