Any one know how to reduce the pressure on a TRW power steering pump?
Pump it down TRW pump?
- Thread starter SGBARRACUDA
- Start date
-
bbab3
Well-Known Member
- Joined
- Feb 4, 2007
- Messages
- 284
- Reaction score
- 188
Last edited:
jcolman
Well-Known Member
Would this work on a Borgeson Saginaw pump? I'd love to dial down the pressue on mine. I have their "power reducing kit" that uses washers, and I've reduced the pressure down to around 900lbs, but it seems like this option might be better for fine tuning. I love the Boregson unit but even at 900lbs, it's still a bit too much power for my Duster.
bbab3
Well-Known Member
- Joined
- Feb 4, 2007
- Messages
- 284
- Reaction score
- 188
For the best advice I would call Bergman Auto Craft. He’s very knowledgeable and easy to talk to.
On my ‘67 Barracuda I called Turn One Steering and they suggested a flow restriction valve, such this for my Saginaw pump. Not sure if it is what I bought though.
Turn One Steering - Steering Products
The OP may want to call both.
On my ‘67 Barracuda I called Turn One Steering and they suggested a flow restriction valve, such this for my Saginaw pump. Not sure if it is what I bought though.
Turn One Steering - Steering Products
The OP may want to call both.
jcolman
Well-Known Member
I talked to the tech at Turn One. Very helpful. I'm going to install their 1.3gpm valve and see if that's all I need for my car.
-
