qa1 lower control arms+hotckis sway bar

[Spanishgold76]

thinking of using this combination just curious if any body has run it on a 73 and later set up

 

[YoungDart75]

I was wondering the same thing. I've got the TVS kit all the way around and was looking at the QA1 K-member ad the QA1 lowers to go with my hotchkis stuff. I just got off the phone with QA1 and with Hotchkis to check, QA1 said as long as the Hotchkis bars mount like the 73-76 factory one there shouldn't be any problems, and Hotchkis said there's mount exactly like the factory ones. So in theory it should all work together just fine. I guess ill be finding out when im don't installing everything this winter.

 

[Spanishgold76]

this is good to know thank you for spreading the wealth greatly helps with some decisions i have coming up

 

[YoungDart75]

I know it works now. Just make sure you put the load on the suspension(either on the ground or using a jack with the front end off the ground) and it works like a charm. Just got mine out of the alignment shop on Monday and everything handles great.

 

[Spanishgold76]

thanks. good to know and sharp looking dart by the way

 

[TrailBeast]

Take those big chrome strips off and it'll look even better.

Oops, there goes my opinion again.

It's still nice though.