Qa1 rear shocks having play on 1964 valiant

-
64whiteghost

64whiteghost

Well-Known Member
Joined
Sep 1, 2020
Messages
351
Reaction score
89
Location
90710
Whats up guys.

Im wondering if anybody has used the QA1 on their rear with an 8 3/4. The top fits fine with mo play. But the bottom has some play front to back.

when i put the stock washer there is still play. Is there a specific washer set I need ?

Has anybody dealt with this ?

See pictures

20230909_151336.jpg


20230909_151346.jpg
 
You are missing the outer washer.
They did not come with a hardware kit?
Are they new or used? They look new. Typically when you buy new shocks in a bag is the washers, possibly a new nut and assembly diagram.
Syleng1
 
Website calls for 3/4" bushing, is that what you have

TN901

QA1 provides performance shock absorbers, suspension, driveshafts, rod end bearings, ball joints and more for circle track, drag racing, street performance, street rodding and industrial markets.
www.qa1.net www.qa1.net
 
69FBCuda said:
Website calls for 3/4" bushing, is that what you have

[/URL][/URL][/URL]
Click to expand...

Syleng1 said:
You are missing the outer washer.
They did not come with a hardware kit?
Are they new or used? They look new. Typically when you buy new shocks in a bag is the washers, possibly a new nut and assembly diagram.
Syleng1
Click to expand...
Im aware its missing thr outer washer. I left it out because you cant see the gap that im showing in the picture. When i put the original washer on it only goes to the end of the thread ans the shock still has play from front washer to back washer. And no. It doesnt not come with a hardware kit. Only different size sleaves

Brand new. And no washer or nut
 
You must log in or register to reply here.
-

Back
Top