Question about a 9.25 rear

[340GTSDart]

This isn't for our Dart, but my wife's 2000 Durango has a pinion yoke on the rear axle that is grooved and is leaking. I talked to two different auto parts stores about a sleeve for a pinion yoke like you can get for a harmonic balancer but they didn't know what I was talking about. Does anyone know where I can get one, if one is even available? A new yoke is around $125-$150.

 

[MPerry]

What you would be looking for is a microsleeve.

Mancini's sells them for 8 3/4 & Dana 60 applications.

http://www.microsleeve.com/

 

[340GTSDart]

For anyone who may run into this problem, I was finally able to track one down at www.drivetrainspecialists.com. It is a Chicago Rawhide part #99187.

 

[rumblefish360]

Can you post a picture of this part. I have a 9-1/4 in my Magnum. Same rear with minor changes to it. I know one is the anti lock up ring on in the rear.

 

[340GTSDart]

I sure can, when it comes in. I just ordered it, so it'll probably be about 3 days or so before I get it.

 

[340GTSDart]

Here it is...and the install tool

 

[JohnRR]

also known as a redi-sleeve , I was able to get one that fit an 8 3/4 axle to fix a grooved axle , far as I know it's still holding , the part wasn't for an 8 3/4 per say I just went thru listing till I found one that fit , did the same on a yoke , that flange on the one in the picture can be removed after install