Aaron65
Well-Known Member
Contact seller
http://www.quickfueltechnology.com/...r-series-600-cfm-single-inlet-fuel-bowls.html
I ran this carb for a short time on my Mustang's 289, and I switched back to my old Edelbrock. I'm just more familiar with Carters.
This carb has around 200 miles on it, and I will include a few different air bleeds and an extra squirter. On my little 289, this carb is a bit rich at idle, a bit lean on transitions and light cruise, and a bit rich at freeway cruise, according to my AFR meter. It has noticeably more power than my Edelbrock.
If you have Holley-style experience, you can likely get it perfect. It probably would be perfect on a bigger engine.
It lists at $345, so I'd like to get $250 plus shipping (OBO). This part is in Bay City, MI. Thanks for looking!
I ran this carb for a short time on my Mustang's 289, and I switched back to my old Edelbrock. I'm just more familiar with Carters.
This carb has around 200 miles on it, and I will include a few different air bleeds and an extra squirter. On my little 289, this carb is a bit rich at idle, a bit lean on transitions and light cruise, and a bit rich at freeway cruise, according to my AFR meter. It has noticeably more power than my Edelbrock.
If you have Holley-style experience, you can likely get it perfect. It probably would be perfect on a bigger engine.
It lists at $345, so I'd like to get $250 plus shipping (OBO). This part is in Bay City, MI. Thanks for looking!