[WANTED] Radiator fan shroud

[dartgss]

Hi everybody

Does anybody has an original Radiator 22" Fan Shroud for 1968?

Chrysler Partnumber 2785614

Thank you very much

Roby:thumblef:

 

[dartgss]

Good Morning,

I found the correct Fan Shroud. Even two:cheers::cheers:

Roby

 

[RedFish]

Buyer beware.
The 614 shroud was repoped and those would melt into the fan.

 

[michformulaS]

Buyer beware.
The 614 shroud was repoped and those would melt into the fan.

Going on a month now driving almost daily with my repop from Mancini driving in 90+ to mid 30's degree weather. I have my fingers crossed but so far so good on the warping issue.

 

[RedFish]

Going on a month now driving almost daily with my repop from Mancini driving in 90+ to mid 30's degree weather. I have my fingers crossed but so far so good on the warping issue.

Those repops first appeared 5+ years ago.
I assume the mfgr corrected their plastics formula at some point.
'll assume some number of the crap ones are still floating around though.
That's the only reason I mentioned it. Good luck to all.

 

[fasbak]

I also experienced the fan shroud issue with a repro. After time it distorts from being cold-warm-cold. Manufacturer made good and replaced it at no charge with a new one made with a different resin[ no problems with new one]. There are still some out there in circulation that are defective, or at least so i was told.

 

[SGBARRACUDA]

Well since you found one or two. I'm still looking for the same shroud. Anyone?

 

[mikebee]

i have a very nice 2998325....i have no idea what it's for....22" for sure.

 

[SGBARRACUDA]

i have a very nice 2998325....i have no idea what it's for....22" for sure.

That is for a later model. 70 and up. I need the same one as the OP. 2785614.

 

[dartgss]

Finally I got today my Radiator 22" with the correct Chrysler Partnumber:cheers::cheers::cheers:

Btw, my both Fan Shrouds aren't repop....