[SOLD] Radiator for Strip A Body Mopar or Stock 318 or Slant 6

[Rocket]

The radiator measures 22.5” x 22.5” x 1.75”. It has a driver’s side inlet and a passenger side outlet. The rad comes with a high efficiency 16” fan that is 3.5” deep. I used this in my 1970 Dodge Dart drag car for 30 runs and it worked well. It kept the engine cool from pit lane down the track and back. It bolted right in to the stock mounting locations.
Sufficient cooling for a stock slant 6 or 318.

Price is $125 plus shipping

 

[38 Dodge]

Shipping to Biloxi MS 39532

 

[Rocket]

PM sent with quote. Thanks

 

[Rocket]

Still available.

 

[dusterdan]

a picture looking down the fill throat (with the cap off) would be nice to see how many rows it is and what condition the core is in....I might be interested, if its a factory mopar part what are the numbers on the top of the tank?

 

[Rocket]

Pictures of rad # and inside view added. It is a 2 row radiator and used at the strip only for a few seasons. Water and water wetter run. No coolant at the track per rulebook.

 

[dusterdan]

Thanks for the pics! It doesn't look too bad, im definitley still interested. i ran the numbers here http://www.rosevillemoparts.com/reference_radiatorguide.php but can't figure out what this came from lol. What kind of hp was your dart putting out?

 

[Rocket]

Engine had ~ 500 HP. Car ran mid tens in the quarter.
Rad shop put in new core on my tanks. It ran a few seasons at the track with water drained at the end of each season. Minor discoloration should come out if you flush system with rad installed or with use. I added a couple of pictures of rad in the car so you can see stock installation.

 

[74DartSwinger360]

The tanks are from something after 1974 cause my Casting number book that covers 1962-1974 doesn't have it. last number for radiators starts with 369

So I am thinkin that rad is from something from the 80's like a fifth avenue or something

 

[MidnightSwinger]

Looks like a F/M/J rad. Great for a bodys that need some extra room in front of the WP. I had one in a 70 Dart with a hot slant,was able to run an electric fan with 1/4" clearance to the WP.