Hello from sweden. Im building a hopped up 318 dodge engine from 87, that is going into my 65 dart gt.
I read that it has a 9 to 1 compression ratio, and im curious if i can get forged pistons that works with my 302 closed chamber heads. Or if there is an easier way to raise the compression without spending a fortune.
Im all ears about any other info on these modern engines. Sorry for bad english and have a good day
I read that it has a 9 to 1 compression ratio, and im curious if i can get forged pistons that works with my 302 closed chamber heads. Or if there is an easier way to raise the compression without spending a fortune.
Im all ears about any other info on these modern engines. Sorry for bad english and have a good day