Rallye dash

[ibleedmoparts]

Is it possible to install a rallye dash in a non rallye car? I am unsure of how the gauge sset mounts...just an idea

Floyd

 

[Longgone]

The wiring harness would likely have to go with it but there are some members here that have done it. I think Jim Lusk is one.

 

[AdamR]

The harness is different and the dash frame will need a ton of trimming.

 

[340Dart]

I did it. And AdamR is right about a ton of trimming.

 

[ibleedmoparts]

Do you have a wiring diagram or did you use the original dash harness? Any pictures of the cut? It looks good...I just may put one in mine

 

[340Dart]

No pictures unfortunately. I didn't have the wiring for the ralley dash. I had to figure out what wire went where, which I wouldn't recommend. I would find the ralley dash harness if you can. I didn't have a wiring diagram.

Fred B

 

[RedFish]

there are all of 3 wires to back out of the round main panel connecter. They move to the 3 pins on left printed circuit board of a rallye panel. Camparing the 2 panels side by side helps determine which 3 that went to what need to be relocated so they still goto same.
Just from memory , one is the left turn lamp wire.

 

[ibleedmoparts]

If anyone has a wiring diagram i'd appreciate it!