[SOLD] Re-Built Lower Control Arms

[R4Sedan]

I have For Sale A Pair of Lower Control Arms. These Are from my '67 Barracuda. I re-built these using Moog bushings. I took a close up of the Right one cause it's a little dinged, however it doesn't affect how the control arm functions. They also come with new re-bound bumpers. I soaked and cleaned these in a parts washer then cleaned them in Evaporust. You can paint them. I was gonna put an aftermarket sway bar on my 'Cuda, but scored a complete Factory set-up. So I'm passing this on to someone else. They should fit '64-'76 A-body,but please do your research.
I want $100 plus the Ride.
I prefer M/O or Check. But I can take PayPal, If you pay the 3%.
Thanks, Larry in Spring Hill, FL 34608

 

[mpd12150]

I am interested in the control arms.
Could you check what shipping would be to 58503, Bismarck ND

Thanks in advance

 

[R4Sedan]

Responded with Shipping quote.

 

[lilnoah]

I am next in line

 

[mpd12150]

Responded with Shipping quote.

I responded back to you as well.

I left my number if you could call me. I am driving down interstate to Mayo Clinic right now.

 

[R4Sedan]

Payment Pending!

 

[crackedback]

FYI.

When installing the lower control arm pins, MAKE SURE you support the backside of the inner sleeve they press in. Use a socket inserted through the hex side. If you don't the inner sleeve presses out the back of the already installed bushing. You'll be installing a fresh set of bushings again!

 

[R4Sedan]

Sold!