[WANTED] Rear Shock Washers

[Jim Kueneman]

Anyone have 3 rear shock conical washers that have the center hole size for the outer threaded side of the mount? I need them for an A100 truck and these use 4 of the bolt sized washers and don’t use the large center hole ones that go on the shock stud in the cars.

 

[65dartcharger]

Anyone have 3 rear shock conical washers that have the center hole size for the outer threaded side of the mount? I need them for an A100 truck and these use 4 of the bolt sized washers and don’t use the large center hole ones that go on the shock stud in the cars.

I'll check tomorrow morning.

 

[Jim Kueneman]

I'll check tomorrow morning.

Thank you Ulf.

 

[berwaldg]

Can you post the dimensions? I have several different sizes.

 

[Jim Kueneman]

They are 1.5" outside with a 0.5" hole.

 

[famous bob]

They are 1.5" outside with a 0.5" hole.

you can make them out of the right size washers , with a ball peen hammer and soft chunk of wood or a sandbag , I did about 12ish yrs ago , still on the car...

 

[barracudakid]

 

[Jim Kueneman]

View attachment 1716266119

Pm sent

 

[berwaldg]

They are 1.5" outside with a 0.5" hole.

Sorry, I only have 1 and it has a 3/8" hole; otherwise its 1.5" and 1/8" thick. You could drill out to 1/2". Happy to ship it your way.

 

[Cuda Al]

There should be one with a large hole (goes on first) then one with a small hole that seats against the shoulder.

62-74 Mopar A B E Body Cuda Challenger GTX NOS Rear Lower Shock Washer Kit. | eBay

Find many great new & used options and get the best deals for 62-74 Mopar A B E Body Cuda Challenger GTX NOS Rear Lower Shock Washer Kit. at the best online prices at eBay! Free shipping for many products!

www.ebay.com

Alan