Rear tranny seal part # please?

[AussiePlymouths]

G'day All,

I have a USA built (Ca) 1963 Plymouth Valiant (not the Aussie built cars) and it seems that the rear tranny seal is leaking badly.
It is the push button 904, of course.

Could someone please post a part # for the seal, so that I can source one from over there please ??

I have developed a consistant vibration which I am sure is the tailshaft (driveshaft?) and I am guessing that it has chewed up my rear tranny seal.
I will remove the tail shaft and have it checked, but I would like to get a seal in the meantime.

As always any help appreciated - many thanks in advance
Gary

 

[RedFish]

You'll need to replace the tail shaft bushing too. A new seal alone wont fix it

 

[oldkimmer]

And u will need the gasket between the tail housing and case. Kim

 

[TrailBeast]

I got my seal and bushing from ebay user Transpartsonline.


BUSHING EXTENSION HOUSING TF-6, A904, A9
Item# 12066/12501A $3.36 USD 1 $3.36 USD

CLAD SEAL EXTENSION With/SHORT BOOT TF-6
Item# 12074D/12925D $4.12 USD 1

Their email is: [email protected]

 

[AussiePlymouths]

G'day, and thanks for those replies - I'll look into that - thanks

 

[Double M]

A 1963 uses a bushing?

Russ.

 

[TrailBeast]

Just so Y'all know, the part numbers for the stuff I listed above are from the website and may not be a usable number for anywhere but there.

www.transpartsonline.com

Then select the trans you have on the left side of the screen and go from there.
Their prices are killer. (in a good way)

 

[bcschief]

SKF 11518 and National 8160S are listed on Rock Auto .com

Brian