Recommended Slick Size

[Cazbah362]

OK folks looking to put a pair of drag slicks on my 71 Dart with BB. Here is what I have now. 295/65/R15's M/T street radials on the rear, 10" Welds with 6" offset, with a 1/2" spacer. The car is mini tubbed, leaf spring relocation and fenders slightly trimmed. Right now if I go straight, no turning I have no rubbing issues. Turning with dips rubs slightly, really very minor

I would like to remove the spacers and put slicks on, what would you all recommend for slick size. I was looking at these: http://www.summitracing.com/parts/hoo-17601

Here is what I have right now:
http://www.summitracing.com/parts/mtt-3762r/overview/

Insight is appreciated - Looking to help lower my 60" times from 2.25

 

[Abodybomber]

What is your combination?????

 

[Cazbah362]

I think your asking what mods I have done. Car is a 440, about 400 hp, convertor @ 28K, with frame connectors, 8 3/4, with 430s. Standard shocks, /6 to BB conversion with/ suspension. Have other ideas to reduce 60 times, slicks are one of them.

 

[Cazbah362]

Anyone