C coffeedart67 Well-Known Member Joined May 9, 2010 Messages 1,200 Reaction score 64 Location Southeast South Dakota Nov 19, 2019 #1 How do I remove the back from bucket seats in a 67 Dart? Thanks Aaron
Alaskan_TA Well-Known Member Joined Nov 12, 2004 Messages 6,415 Reaction score 5,292 Location PA Nov 19, 2019 #2 If they are the same as a '68...... Flip seat back forward. Remove the two screws in the base / bottom flange. Gently pull the seat back panel down, then out.
If they are the same as a '68...... Flip seat back forward. Remove the two screws in the base / bottom flange. Gently pull the seat back panel down, then out.
4spdragtop FABO Gold Member FABO Gold Member Joined Aug 28, 2009 Messages 42,023 Reaction score 26,080 Location Ontario Parts Unknown Nov 19, 2019 #3 Heres pic from our 67 cuda. Zoom in and you can see screw holes on bottom, and 2 "grabs" on panel. Not sure if darts are the same.
Heres pic from our 67 cuda. Zoom in and you can see screw holes on bottom, and 2 "grabs" on panel. Not sure if darts are the same.
C coffeedart67 Well-Known Member Joined May 9, 2010 Messages 1,200 Reaction score 64 Location Southeast South Dakota Nov 21, 2019 #4 Ok, thanks. Will give it a try tomorrow.