Right flywheel for a 318

[68383GTS]

If I remember right this is the flywheel I need for a LA 318 right? Thank You,Jim


[ame="http://www.ebay.com/itm/Flywheel-10-5-Mopar-130t-Internal-Balance-318-340-383-440-Dodge-Chrysler-BB-SB/291212558455?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D23492%26meid%3Da9745c0fa44f4607a725bc3ecb726304%26pid%3D100005%26prg%3D10073%26rk%3D3%26rkt%3D6%26sd%3D321480568353&rt=nc"]http://www.ebay.com/itm/Flywheel-10-5-Mopar-130t-Internal-Balance-318-340-383-440-Dodge-Chrysler-BB-SB/291212558455?_trksid=p2047675.c100005.m1851&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D23492%26meid%3Da9745c0fa44f4607a725bc3ecb726304%26pid%3D100005%26prg%3D10073%26rk%3D3%26rkt%3D6%26sd%3D321480568353&rt=nc[/ame]

 

[Inertia]

http://www.summitracing.com/int/parts/zzz-50-3409/overview/make/dodge

Hope it helps

 

[rumblefish360]

What you need is ... The Same flywheel as a 340.

 

[Princess Valiant]

you will know if you have the wrong one once you get over 2K rpms

I put a neutral balance one on a 360 one time and it started out fine but right about 2K rpm I got a vibration that felt like if was trying to shake the radio out of the dash. #-o

 

[68383GTS]

Yes I know Rani that is why I want the right one.I do notwant to do it twice.

 

[66fs]

You should be good. 130 teeth, 10.5 or 10.95 clutch, internal balance. 318 or 340 forged crank. Check your bellhousing, that determines your flywheel as well.

 

[68383GTS]

I do not have a bellhouse yet looking to buy a stock 10.5

 

[chryslerfat]

Yes that is the correct one.

 

[66fs]

Are we talking about the 71 Duster? 10.95 diameter disc will fit on the same pattern as the 10.5 diameter disc.

 

[68383GTS]

Yes the 71 Duster.Duster make over part 2 coming this fall-winter.She is gettin a 318 and a 4 speed.

 

[66fs]

Very Nice. Good combination.