found a few small pumps capable of 60psi and .5 to 2 gpm. should be enough, but wanna be sure before i build it and lock it up. doing it this way i can use the regular crane rockers instead of the $1200 T&D
ok why don't you use a oil filter adapter and tap a direct line from it thru the vc's into the end of the shafts. have seen it this way on some old late model stockers.
You mean a separate oil pump? You can tap off the existing system and use external feeds to the shafts and just use carb jets to restrict it. Same type of deal as the Indy headed big blocks. Or I've seen a few shops that did sucessfully drill those holes... I don't think I'd want a separate system unless you had a pressure sensor and a light for it.