Roll Control set up...

[Woodie]

Anyone want to share pics of their set up? Location and brakelines...

Thanks.

 

[LJ67barracuda340]

Anyone want to share pics of their set up? Location and brakelines...

Thanks.

my set up EH!

 

[oldkimmer]

I plumbed mine in the front brake line under the master cylinder. Just put a toggle switch in the dash. Kim

 

[MidTexCuda]

if it is a drag car with small front tires put the proportioning valve on the front brake line

 

[diymirage]

Do a search for "line lock" in the brake section of the forum, I'm guessing that will yield the most results

 

[Cope]

I have me triggered by the button on the shifter.
I have toggle switchs so I can activatethe line lock alone or at the same time as the 2 step.

 

[D-50394]

I have me triggered by the button on the shifter.
I have toggle switchs so I can activatethe line lock alone or at the same time as the 2 step.

Mine is on a toggle switch. The tracks I race at it is illegal to have the line lock on a button. I race in the foot brake class. No line locks at the starting line.

 

[LJ67barracuda340]

I couldn't find a suitable place for a button, didn't want a wire coming up the factory style console shifter. It was planned to be a hill assist more than for racing use (just maybe the odd burn out). I put in a toggle that switches the horn ring from horn to line lock. Flip the switch and hold the front brakes, just remember to flip it back to get A## Holes out of the way.

 

[12many]

On my van I installed a Biondi line lock on the rear brake line, this after reading many that have done this on auto trans cars, you lock out the rears, apply the front brakes with the pedal and control the release as you come out of the box.

 

[440 Mike]

On my van I installed a Biondi line lock on the rear brake line, this after reading many that have done this on auto trans cars, you lock out the rears, apply the front brakes with the pedal and control the release as you come out of the box.

This is exactly the way that I'm going to do it.