Cuda416
Well-Known Member
Alright, getting ready to put the disc swap onto our 65 Valiant.
I have the following
from a 87 5th ave
Spindles
2.75" calipers (front mount)
11" rotors (just shy)
From a 73-76 A body
Uppwer control arms
Upper ball joint
Lower ball joint (bolt and nut style)
We plan to use banjo lines from a 69 Camaro, seems this is the thing to do. We're also replacing the lines front to back, splitting it into two circuits and putting a dual resivior MC on. Still need the adapter plate, but that's in the noise.
Assuming (yeah I know) this is all good, do I need a "special" MC pushrod?
I have the following
from a 87 5th ave
Spindles
2.75" calipers (front mount)
11" rotors (just shy)
From a 73-76 A body
Uppwer control arms
Upper ball joint
Lower ball joint (bolt and nut style)
We plan to use banjo lines from a 69 Camaro, seems this is the thing to do. We're also replacing the lines front to back, splitting it into two circuits and putting a dual resivior MC on. Still need the adapter plate, but that's in the noise.
Assuming (yeah I know) this is all good, do I need a "special" MC pushrod?